AB Series
AF Series
AE Series
AD Series
AL Series
AN Series
AM Series
PE Series
PN Series
PG Series
PB Series
ABR Series
AFR Series
AER Series
AT Series
ADR Series
ALR Series
ANR SeriesAF/AFR Series
Seven (7) Sizes Available - 42mm thru 220mm- EVERY Single Stage Ratio : 3 thru 10:1, Up to 200:1
- Low Backlash Available - less than 1 arc-minute
- Low Noise - less than 56dB
- High Efficiency - Over 97%
- Keyed and Smooth Shafting Standard
- Stainless Steel construction
- Patented One Piece Planet Carrier (US PATENT #6,503,168)
- Lubricated for Life
- Mounts to ANY motor in Seconds
- ATEX compliant
The Apex AF series is the Next generation in planetary technology. Highest Precision, Highest Torque and Quiet Operation are provided by 100% optimized Helical Gearing. High Axial and Radial Loads provided by High Precision Taper Roller Bearings.
The Apex AFR version has a 90° input via helical bevel gear. Features an extremely short, light yet rigid housing and full compatibility with standard motor adapters.
Competitive Drop In Replacements:
Alpha SP Series
Stober P Series
Micron UT and AT Series
-
Patented output sealing systems design eliminates friction and heat generation which is accomplished by applying our hi-tech coating to all output contact surfaces. This coating reaches a hardness of 3700Hv and is ground to Ra 0.2 µ m finish to ensure sealing.
NEW -
Patented input sealing system design eliminates break away torque and decreases friction/heat. The hi-tech coating bushing (3700 Hv, Ra 0.2 µ m finish) interfaces with our proprietary seal which decreases wear and erosion of both sealing surfaces. This new patent prevents leakage and has a service life of over 30,000 hours.
NEW 
True Helical Gear Design
Precision helical gearing increases tooth to tooth contact ratio by over 33% vs spur gearing. The helix angle produces smooth and quiet operation with decreased backlash (less than 1 arc-minutes and ≤ 56dB).
Equipped with solid uncaged needle roller bearings, provides maximum contact points to increase stiffness and generates high output toque.
A high setting gear performance is achieved by using our HeliTopo technology. This eases off the tooth profile and crowns the lead of each tooth. This optimizes the gear mesh alignment and overlap to achieve maximum tooth surface contact.
Our in house plasma nitriding heat treatment process maintains the tooth surface hardness at 840Hv for superior wear-resistance and a core hardness at 30 HRc for toughness.
One piece planet carrier with extended bearing design provides maximum radial load capacity and increases system reliability and stiffness.
Lubricated with Nyogel 792D synthetic grease (Smart Grease) and sealed to IP65 standards prevents leakage and is maintenance free.
Patented planet carrier design puts the sun gear bearing directly into the planet carrier. It minimizes gear misalignment to gain higher accuracy.
Triple split collet with dynamic balanced set collar clamping system provides backlash free power transmission and eliminates slippage. 100% concentricity allows for smooth rotation and higher input speed capability.
Precision taper roller bearing support to increase radial and axial loading capacity